Chamois Leather , skiver leather, leather, tannery,manufacturer,autochamois,car care,naturall,chamois leather,chamois cloth,chamois sponge,cod oil tanned,car cleaning,auto care,crust,pickled,garments,leather goods,product,turkey,izmir,europe,worlwide,leder,fensterleder,auto leder,nappa,sheep,new zealand,wet blue,chrome tannage,uk domestic,chamois tannery,automobile,automotive,car accessories,car,cleaning,window cleaning,chammy,skin,sheep,lamb,tan,tanning,tanner,manufacturers,polishing,sponges,demisters,dusters,sheepskin.

 

Chamois Leather FAQ

Why use Chamois Leather ?
Typically chamois leather is used to dry off surfaces after washing; this is due to the absorbency and softness of the leather. In addition, grime particles are drawn away from the surface being cleaned. The particles are held within the hollow fiber of the leather, eliminating abrasion.
 
 
How to care for my Chamois ?
Give it a good rinse in lukewarm water with a mild non-alkaline soap, or mild detergent. Squeeze/wring the chamois to remove excess water. Gently stretch and hang it in area protected from direct sunlight and intense heat. Take care not to over dry.

 

How do I clean and dry my car with a Chamois ?
  1. First wash car as recommended by manufacturer.
  2. Then use a chamois to dry your car.
  3. Rinse chamois in water, wring out excess.
  4. The chamois needs to be damp, but not wet to work.
  5. Remove the majority of water by sweeping the chamois over the car, wringing out excess water as you proceed.
  6. Buff any remaining damp areas until dry, again wringing as necessary.
  7. Clean and dry your chamois.
How does The Zimeks Company make Chamois Leather ?
Chamois leather is made from high quality sheep and lamb skin.
  1. The skin is split into 2 pieces.
  2. The flesh side being used for chamois and the outer piece for other leather types.
  3. The flesh side is Hot Drum Tanned in genuine Cod Liver Oil.
  4. Thus giving the skin its unique character of chamois leather.
  5. Chamois leather is then dry-cleaned to remove excess oil.
  6. Final stages include buffing the leather with an abrasive wheel, removing any excess grain and fleshings.